BTI Hammer

BTI hammer in use on a site

Features…..

  • BTI TM20S/TB425X Stationary Rockbreaker System

    Pedestal mounted, swing post type rockbreaker system, 20 foot nominal reach 170 degree swing c/w 3 1/2″ diameter swing post pins Dual 5″ bore x 2 3/4″ rod swing cylinders c/w 2 1/2″ diameter pins Hoist cylinder 6″ bore x 3 1/2″ rod c/w 2 1/2″ diameter pins Dipperstick cylinder 5″ bore x 2 3/4″ rod c/w 2 1/2″ diameter pins Tilt cylinder 5″ bore x 2 3/4″ rod c/ 2 1/2″ diameter pins Idler and power link arrangement for tilt function

    Hydraulic Breaker

    1,100 FT-LB class, heavy duty, side plated, top mounted hydraulic breaker

    Control System

    Danfoss PVG32 Electro-hydraulic directional control valve c/w one on/off function for breaker fire and four proportional functions for cylinder functions. 10 conductor control cable between joysticks and control valve

    Hydraulic Power Unit

    100 Gallon elevated reservoir c/w separate stand and flooded inlet Suction strainer Pressure filter Return filter Low oil level interlock Clean out cover Temperature indication Drain (ball valve) Pressurized filler cap c/w air filter 2 kW immersion heater 30 HP TEFC electric motor Variable displacement load sense hydraulic pump

Features…..

 

BTI TM20S/TB425X Stationary Rockbreaker System

Pedestal mounted, swing post type rockbreaker system, 20 foot nominal reach 170 degree swing c/w 3 1/2″ diameter swing post pins Dual 5″ bore x 2 3/4″ rod swing cylinders c/w 2 1/2″ diameter pins Hoist cylinder 6″ bore x 3 1/2″ rod c/w 2 1/2″ diameter pins Dipperstick cylinder 5″ bore x 2 3/4″ rod c/w 2 1/2″ diameter pins Tilt cylinder 5″ bore x 2 3/4″ rod c/ 2 1/2″ diameter pins Idler and power link arrangement for tilt function

Hydraulic Breaker

1,100 FT-LB class, heavy duty, side plated, top mounted hydraulic breaker

Control System

Danfoss PVG32 Electro-hydraulic directional control valve c/w one on/off function for breaker fire and four proportional functions for cylinder functions. 10 conductor control cable between joysticks and control valve

Hydraulic Power Unit

100 Gallon elevated reservoir c/w separate stand and flooded inlet Suction strainer Pressure filter Return filter Low oil level interlock Clean out cover Temperature indication Drain (ball valve) Pressurized filler cap c/w air filter 2 kW immersion heater 30 HP TEFC electric motor Variable displacement load sense hydraulic pump