Washer System
- Unit is pre-plumbed for single point fresh water connection (8″ pipe-8-bolt flange)
- Two (2) 1 1/2″ chase water connections with a gate valve for even distribution between screws
- Manifold with flow control valves for individual spray bard
- Eleven (11) screen spray bars, each with v-jet nozzles
Screen Chutes & Fines Chute
- Slurry style screen feed chute to pre-soak material
- Chutes constructed from 3/16″ mild steel with 1/2″ Metal Backed Rubber Liners
- Roll Away Oversize Discharge Chute 2/ 2 sets of Finger Gates for Blending
- Reversible discharge chutes
- Fines flume with wash back line
Chassis
- Heavy-duty fabricated frame with cribbing supports
- Dual axle suspension with eight 11R24.5 tires
- Road ready (air brakes, light kit, mud flaps)
Access
- Walkway access around three (3) sides of screen with stair access
Screen
- Metso FS253, 6’x16′, 3 Deck, horizontal
- Triple-shaft, MV2 mechanism
- Weld-free side plates with huck bolt construction
- Single-crown-construction decks for side tensioned media
- 50 HP, 1200 RPM, TEFC (NEMA C) Motor
- Replaceable feed box and discharge lip liners
Fine Material washer
- Twin 36″ x 25′ Fine material double screw washer
- 1/4″ mild steel tub construction
- Welded steel flights with replaceable shoes
- Adjustable discharge chute
- Two (2) 15 HP, 1800 RPM, NEMA Premium Efficiency Motors
Available Options
- Pre-wired electrical starter panel
- Hydraulic leveling legs with power pack
